Urinal Sensor
Spreader Washing System
- Water flushes rapidly from the spreader and thoroughly washes the inside of the urinal.
- The spreader washing system washes with smaller amount of water more effectively compared to the normal plural hole model.
- With the built-in flow regulator, flushing is stabilized. (Only for USW 520 CB Built-in Sensor Urinal)

Prior Use Flush
The prior use flush mode can be set to operate either 2 or 5 seconds after detecting a user.



24 Hour Flushing Interval
The urinal sensor automatically flushes 24 hours after the last flushing to prevent the trap and the drainpipe from being dried out when the urinal is unused for long periods of time.

Easy Cleaning
To expedite cleaning, a special pen-shaped magnetic device automatically flushes the individual urinals when brought to close proximity to the sensor.

Vandal Resistant
The sensor is encased in heavy-duty glass and the body is made of alloy die casting. It’s resistant to vandalism even from direct contact with burning cigarettes.

Specification
Model TEA 99 DV1 , TEA 61 D , USB 520 CB
Power Supply Battery
Battery Life 2 Years at 4,000 uses per month
Sensor Controller Infrared sensor equiped with fuzzy logic control software
Sensing Distance Within 60 ~ 80 cm range from the sensor
Water Supply Diameter 15 A
Water Supply Pressure Min. 0.7 kgf / cm2 to Max. 7.0 kgf / cm2
Flush Volume Fuzzy Logic Controlled software automatically flushes from 2.5 ~ 5.0 L depending on the duration and frequncy of use
Ambient Temperature 0 ~ 40oC (Water temperature: 1 ~ 50oC)